<?xml version="1.0"?>
<doc>
  <assembly>
    <name>C1.C1Report.CustomFields.2</name>
  </assembly>
  <members>
    <member name="T:C1.C1Report.CustomFields.Chart">
      <summary>
            The Chart Class inherits from <see cref="T:C1.C1Report.Field" /> and uses the 
            <see cref="T:C1.Win.C1Chart.C1Chart" /> control to embed data bound charts in reports.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.ChartTypeEnum">
      <summary>
            Specifies the type of chart to display.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Bar">
      <summary>
            A chart that draws each series as a bar in a cluster.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Area">
      <summary>
            A chart that draws each series as connected points of data, 
            filled below the points.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Scatter">
      <summary>
            A chart that uses two values to represent each data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Pie">
      <summary>
            A chart that draws each series as a slice in a pie.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Line">
      <summary>
            A chart that represents data as data points connected with line.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Column">
      <summary>
            A chart that draws each series as a vertical bar in a cluster.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Step">
      <summary>
            A chart that draws each series as a form of a XY Plot chart.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Histogram">
      <summary>
            A chart that takes a collection of raw data values and plots the frequency distribution.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Radar">
      <summary>
            A chart that draws each series as a radar line.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ChartTypeEnum.Polar">
      <summary>
            A chart that draws each series as (theta,r), 
            where theta is amount of rotation from the origin and r is the distance from the origin.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.ImageTypeEnum">
      <summary>
            Specifies the type of image to generate.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ImageTypeEnum.Emf">
      <summary>
            Enhanced Windows metafile image format (EMF).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ImageTypeEnum.Png">
      <summary>
            W3C Portable Network Graphics (PNG) image format.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ImageTypeEnum.Gif">
      <summary>
            Graphics Interchange Format (GIF) image format.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ImageTypeEnum.Jpeg">
      <summary>
            Joint Photographic Experts Group (JPEG) image format.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ImageTypeEnum.Bmp">
      <summary>
            Bitmap image format (BMP).
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.ShowLegendEnum">
      <summary>
            Specifies whether a legend should be displayed.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ShowLegendEnum.Automatic">
      <summary>
            Show legend if there are two or more series.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ShowLegendEnum.Always">
      <summary>
            Always show legend.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ShowLegendEnum.Never">
      <summary>
            Never show legend.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.AggregateEnum">
      <summary>
            Specifies how data should be aggregated for charting.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.None">
      <summary>
            Raw values (no aggregation).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.Sum">
      <summary>
            Sum all values for each point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.Count">
      <summary>
            Number of values for each point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.Average">
      <summary>
            Average all values for each point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.Minimum">
      <summary>
            Get the minimum value for each point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.Maximum">
      <summary>
            Get the maximum value for each point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.Variance">
      <summary>
            Gets the variance of the values for each point (sample).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.VariancePop">
      <summary>
            Gets the variance of the values for each point (population).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.StandardDeviation">
      <summary>
            Gets the standard deviation of the values for each point (sample).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AggregateEnum.StandardDeviationPop">
      <summary>
            Gets the standard deviation of the values for each point (population).
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.LabelCompassEnum">
      <summary>
            Specifies data label location relative to the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.None">
      <summary>
            Label is not shown.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.North">
      <summary>
            Label is to the north of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.NorthEast">
      <summary>
            Label is to the north east of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.East">
      <summary>
            Label is to the east of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.SouthEast">
      <summary>
            Label is to the south east of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.South">
      <summary>
            Label is to the south of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.SouthWest">
      <summary>
            Label is to the south west of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.West">
      <summary>
            Label is to the west of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.NorthWest">
      <summary>
            Label is to the north west of the data point.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.Radial">
      <summary>
            In a pie chart, label is directly away from the center of the chart.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.Orthogonal">
      <summary>
            Label is perpendicularly away from the plot line.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.Auto">
      <summary>
            Automatic label arrangement.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LabelCompassEnum.RadialText">
      <summary>
            Label is perpendicular away from the plot line, with text oriented along that line.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.ShadingEnum">
      <summary>
            Specifies the type of shading used when rendering 3D charts.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ShadingEnum.None">
      <summary>
            No special 3D color is applied.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ShadingEnum.ColorLight">
      <summary>
            3D color is lighter than front color.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.ShadingEnum.ColorDark">
      <summary>
            3D color is darker than front color.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions">
      <summary>
            Flags controlling which label positions are allowed when labels are arranged automatically.
            </summary>
    </member>
    <!-- Badly formed XML comment ignored for member "F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.Default" -->
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.Top">
      <summary>
            Allows top label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.Left">
      <summary>
            Allows left label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.Bottom">
      <summary>
            Allows bottom label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.Right">
      <summary>
            Allows right label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.TopRight">
      <summary>
            Allows top right label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.BottomRight">
      <summary>
            Allows bottom right label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.BottomLeft">
      <summary>
            Allows bottom left label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.TopLeft">
      <summary>
            Allows top left label position.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementOptions.UseDataPoints">
      <summary>
            Labels should not cover data points.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.AutoLabelArrangementMethodEnum">
      <summary>
            Specifies the label auto arrangement method.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementMethodEnum.Decimation">
      <summary>
            Remove labels which cannot be placed without overlapping.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.AutoLabelArrangementMethodEnum.FindingOptimum">
      <summary>
            Try to position all labels avoiding overlapping.
            </summary>
    </member>
    <member name="M:C1.C1Report.CustomFields.Chart.#ctor">
      <summary>
            Initializes a new instance of the <b>C1Chart</b> class.
            </summary>
    </member>
    <member name="M:C1.C1Report.CustomFields.Chart.Clone">
      <summary>
            Overridden to clone the inner C1Chart control in the field so the 
            clone doesn't reference the original field's chart.
            </summary>
      <returns>A deep clone of the <see cref="T:C1.C1Report.CustomFields.Chart" /> field.</returns>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.Radar">
      <summary>
            Gets or sets options for Radar chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.Polar">
      <summary>
            Gets or sets options for Polar chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.Histogram">
      <summary>
            Gets or sets options for Histogram chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.ChartType">
      <summary>
            Gets or sets the chart type. Available types are Area, Bar, Pie, Scatter, Line and Column.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.RadialLabels">
      <summary>
            This property only applies to Pie charts. 
            It causes the field to add radial labels attached to the pie slices 
            instead of a legend.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.ShowPercentages">
      <summary>
            This property only applies to Pie charts. 
            It causes the field to add percentage labels to the pie slices.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.RecordSource">
      <summary>
            Gets or sets a Sql statement to use and retrieve data for the chart.
            </summary>
      <remarks>
            If provided, data is retrieved using the parent report's ConnectionString. 
            If omitted, data is retrieved directly from the parent report. 
            In this latter case, the data is automatically filtered according 
            to the current grouping scope (e.g. a chart in a 'Category' 
            group header would contain data only for the current category).
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.DataX">
      <summary>
            Gets or sets a string containing one field with the chart labels.
            </summary>
      <remarks>
            Labels are displayed along the X axis or along with pie slices. For example:
            <example>chartField.DataX = "ProductName"</example></remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.DataY">
      <summary>
            Gets or sets a string containing one or more fields with the data to plot on the chart.
            </summary>
      <remarks>
            If multiple fields are provided, they must be separated with semicolons. For example:
            <example>chartField.DataY = "UnitPrice;UnitsInStock"</example>
            You can also use regular VBScript expressions instead of simple field names. 
            For example, to plot sales and sales taxes as two separate series, you could use:
            <example>chartField.DataY = "Sales;Sales * 0.085"</example></remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.DataYLabels">
      <summary>
            Gets or sets a string containing text labels to use for <see cref="P:C1.C1Report.CustomFields.Chart.DataY" />.
            <para>
            If null or empty, field names specified by <see cref="P:C1.C1Report.CustomFields.Chart.DataY" /> are used.
            </para><para>
            If multiple labels are provided, they must be separated with semicolons. For example:
            <example>chartField.DataYLabels = "Unit Price;Units In Stock"</example></para></summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.DataColor">
      <summary>
            Specifies the color for the chart bars, lines, symbols, or pie slices.
            </summary>
      <remarks>
            If the chart contains more than one series (or pie slices) 
            then additional colors are generated automatically by making 
            the base color lighter. To control the color of each series in 
            a multi-series chart, use the <see cref="P:C1.C1Report.CustomFields.Chart.Palette" /> property instead.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.Palette">
      <summary>
            Specifies a collection of colors to be used for each series (or pie slices).
            </summary>
      <remarks>
            The collection is specified as a string containing a list of color names, 
            delimited by semicolons. For example:
            <example>chartField.Palette = "Red;Green;Blue"</example></remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.GridLines">
      <summary>
            Adds gridlines to charts. This property does not apply to Pie charts.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.Boxed">
      <summary>
            Draws a box around the plot area.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.Use3D">
      <summary>
            Applies 3D effects to the charts.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.XMin">
      <summary>
            Gets or sets the minimum value for the X axis.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.XMax">
      <summary>
            Gets or sets the maximum value for the X axis.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.YMin">
      <summary>
            Gets or sets the minimum value for the Y axis.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.YMax">
      <summary>
            Gets or sets the maximum value for the Y axis.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FormatX">
      <summary>
            Gets or sets the annotation format for the X axis.
            </summary>
      <remarks>
        <para>This property controls the format used to display values along the X axis of the chart.</para>
        <para>The value is a regular .NET format string that is used to format numeric or <see cref="T:System.DateTime" /> 
            values. For details on how to specify format strings, see the <see cref="T:System.IFormattable" /> interface.</para>
        <para>Typical values used for formatting numeric values are "F2" (floating point with two decimals),
            "C" (currency), and "#,##0.00" (thousand-separated values with two decimals).</para>
            See also <b>C1.Win.C1Chart.Axis.AnnoFormat</b>.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FormatY">
      <summary>
            Gets or sets the annotation format for the Y axis. 
            </summary>
      <remarks>
        <para>This property controls the format used to display values along the Y axis of the chart.</para>
        <para>The value is a regular .NET format string that is used to format numeric or <see cref="T:System.DateTime" /> 
            values. For details on how to specify format strings, see the <see cref="T:System.IFormattable" /> interface.</para>
        <para>Typical values used for formatting numeric values are "F2" (floating point with two decimals),
            "C" (currency), and "#,##0.00" (thousand-separated values with two decimals).</para>
            See also <b>C1.Win.C1Chart.Axis.AnnoFormat</b>.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LabelCompass">
      <summary>
            Gets or sets the location of labels relative to data points. If set to Auto,
            several AutoLabel* properties provide additional options.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LabelOffset">
      <summary>
            Gets or sets the distance between a label and its associated data point (maximum distance when auto arranging labels).
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LabelConnected">
      <summary>
            Gets or sets a value indicating whether a connecting line is drawn from a label to its associated data point.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LabelAutoArrangeMethod">
      <summary>
            Gets or sets method used to auto arrange labels (used only if LabelCompass is Auto).
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LabelAutoArrangeOptions">
      <summary>
            Gets or sets flags controlling which locations are allowed when auto arranging labels (applicable only if LabelCompass is Auto).
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.SeriesOffset">
      <summary>
            Gets or sets the data series offset for appropriate charts.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.ShowOutline">
      <summary>
            Gets or sets a value indicating whether chart figures should be outlined.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.OutlineColor">
      <summary>
            Gets or sets the color used to draw outlines.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.PieStartAngle">
      <summary>
            For Pie charts, gets or sets the starting angle of the first slice (in degrees, counter-clockwise from the X axis).
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.PieClockwise">
      <summary>
            For Pie charts, gets or sets a value indicating whether series are drawn clockwise or counter-clockwise.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.PieInnerRadius">
      <summary>
            For Pie charts, gets or sets the inner radius of the pie, in percent relative to the outer radius.
            Values greater than 0 turn a pie chart into a doughnut.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.View3dDepth">
      <summary>
            For 3D charts (Use3D is true), gets or sets the apparent chart depth as a percentage of chart width.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.View3dElevation">
      <summary>
            For 3D charts (Use3D is true), gets or sets the apparent degree of inclination of the eye-point above the X-axis.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.View3dRotation">
      <summary>
            For 3D charts (Use3D is true), gets or sets the apparent degree of rotation of the eye-point to the right of the Y-axis.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.View3dShading">
      <summary>
            For 3D charts (Use3D is true), gets or sets the type of shading applied to 3D areas of the chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.ImageType">
      <summary>
            Gets or sets the type of image generated by the chart.
            </summary>
      <remarks>Because of GDI+ limitation, this conversion does not support transparency.</remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.ShowLegend">
      <summary>
            Gets or sets a value indicating whether the chart should include a legend.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.Aggregate">
      <summary>
            Gets or sets how values should be aggregated on the chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.ChartControl">
      <summary>
            Gets a reference to the underlying <c>C1Chart</c> control. 
            </summary>
      <remarks>
            You can set properties in the underlying <c>C1Chart</c> control using script or code, 
            but these properties are not persisted when the report is saved.
            </remarks>
    </member>
    <member name="M:C1.C1Report.CustomFields.Chart.GetRenderContent(System.String@,System.Drawing.Image@,System.Boolean)">
      <summary>
            Selects the text or image that will be rendered by the field.
            </summary>
      <param name="value">Field text.</param>
      <param name="img">Chart image.</param>
      <param name="designTime">Whether we in design time or runtime.</param>
    </member>
    <member name="M:C1.C1Report.CustomFields.Chart.OnPropertyChanged">
      <summary>
            Marks the owner report as dirty so it will clear the internal 
            cache and render again (useful for implementing custom fields).
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.ChartOwnedItem">
      <summary>
            Represents that the instance of this class is owned by Chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.ChartOwnedItem.Owner">
      <summary>
            Gets or sets the chart object as owner.
            </summary>
    </member>
    <member name="M:C1.C1Report.CustomFields.Chart.ChartOwnedItem.Clone(C1.C1Report.CustomFields.Chart)">
      <summary>
            Create a duplicate instance of this object.
            </summary>
      <param name="owner">The owner of the new object.</param>
      <returns>A new object which is a copy of this object.</returns>
    </member>
    <member name="M:C1.C1Report.CustomFields.Chart.ChartOwnedItem.OnPropertyChanged">
      <summary>
            Notify the owner that some property changed.
            </summary>
    </member>
    <member name="M:C1.C1Report.CustomFields.Chart.ChartOwnedItem.OnOwnerChanged">
      <summary>
            Notify the owner of this object is changed.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.CircularOptions">
      <summary>
            Represents the common options for Radar and Polar chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.CircularOptions.Start">
      <summary>
            Gets or sets the starting angle of Radar and Polar chart.
            </summary>
      <remarks>
            The angle is measured in degrees if the Degrees property is true, radians otherwise.
            The angle is measured in the counter-clockwise direction from the 12 o'clock position.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.CircularOptions.Degrees">
      <summary>
            Gets or sets whether the Start value reflects angles in degrees (true) or radians (false) for Radar and Polar chart.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.RadarOptions">
      <summary>
            Represents the options for Radar chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.RadarOptions.Filled">
      <summary>
            Gets or sets whether Radar chart should be filled.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.RadarOptions.FlatGridLines">
      <summary>
            Gets or sets whether Radar chart should use flat Y coordinate gridlines. By default, Y coordinate gridlines are circular.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.PolarOptions">
      <summary>
            Represents the options for Polar chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.PolarOptions.PiRatioAnnotations">
      <summary>
            Gets or sets whether polar chart measured in radians should be annotated with Pi rations.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.HistogramOptions">
      <summary>
            Represents the options for Histogram chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.Normalized">
      <summary>
            Gets or sets whether each histogram series interval is normalized.
            </summary>
      <remarks>
            When histograms with non-uniform intervals are generated, each interval
            is typically normalized such that each interval height represents the
            same frequency per unit width.  This preserves the most appropriate
            histogram shape.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.NormalizationInterval">
      <summary>
            Gets or sets the normalization interval width.
            </summary>
      <remarks>
            When histograms with non-uniform intervals are generated, each interval
            is typically normalized such that each interval height represents the
            same frequency per unit width.  This preserves the most appropriate
            histogram shape.  The normalization interval width is the width to which
            all other intervals are normalized.  Intervals with the same width as the
            normalization width, will have a height which directly indicates its value.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.NormalDisplay">
      <summary>
            Gets or sets an object describing a Gaussian normal curve display.
            </summary>
      <remarks>
            Histograms and frequency graphs are used to show the distribution of
            data values.  Very often, the data distributions are compared to normal
            distributions.  The properties of the NormalCurve object control the
            appearance of a built in display of a Normal (Gaussian) curve for
            comparison.  The normal curve is unrelated to the data.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.DisplayType">
      <summary>
            Gets or sets the method used to display the frequency data.
            </summary>
      <remarks>
            Frequency data can be displayed in a different manner on a per series
            basis, making it possible to mix display types in a single chart group.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.IntervalCreationMethod">
      <summary>
            Gets or sets the method used to specify the histogram intervals.
            </summary>
      <remarks>
            Interval boundaries can be established in a variety of ways.
            <para>When the Automatic method is used, the chart calculates
            the upper and lower limits of the intervals using the maximum and minimum
            data values, and restricting the intervals to lie within 3 standard deviations
            of the data mean.  The number of intervals is optional.  Interval boundaries
            are calculated uniformly.</para><para>When the SemiAutomatic method is used, the upper and lower limits
            of the intervals are specified together with the number of intervals.
            Interval boundaries are calculated uniformly.</para><para>When the XDataBoundaries method is used, the X values of the data
            data series are used to explicitly set each interval boundary.  The X values
            are sorted and duplicate values are eliminated.  Each ascending value of the
            result is used determine the next interval boundary.  Thus, the first and second
            resulting X values define the first interval and each successive X value specifies
            the end of the next interval.  Note that specification of N intervals requires
            N+1 unique X values.
            </para></remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.IntervalNumber">
      <summary>
            Gets or sets the number of intervals in the histogram.
            </summary>
      <remarks>
            The IntervalNumber property applies only to histograms created with
            Automatic and SemiAutomatic methods.  When the XDataBoundaries method
            is used, the number of intervals is defined as 1 less than the number
            of unique X values specified.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.IntervalStart">
      <summary>
            Gets or sets the numeric value of the beginning of the first interval.
            </summary>
      <remarks>Applies only to the SemiAutomatic creation method.</remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.HistogramOptions.IntervalWidth">
      <summary>
            Gets or sets the numeric value of the width of the each interval.
            </summary>
      <remarks>Applies only to the SemiAutomatic creation method.</remarks>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.NormalCurve">
      <summary>
            Represents the appearance of the  normal curve for the Histogram chart.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.NormalCurve.ForegroundDisplay">
      <summary>
            Gets or sets whether the Normal (Gaussian) curve is displayed on top of the chart data display.
            </summary>
      <remarks>
            By default, the Normal (Gaussian) curve is displayed behind all charted data.  Setting
            the ForegroundDisplay property to true specifies that the Normal curve should be drawn
            on top of the charted data.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.NormalCurve.LineStyle">
      <summary>
            Gets or sets the LineStyle object for the Normal curve.
            </summary>
      <remarks>
            The LineStyle property controls the appearance of the actual line drawn
            representing the Normal curve.  The FillStyle property controls the
            appearance of the area under the Normal curve.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.NormalCurve.FillStyle">
      <summary>
            Gets or sets the FillStyle object for the Normal curve.
            </summary>
      <remarks>
            The FillStyle property controls the appearance of the area under the Normal
            curve.  The LineStyle property controls the appearance of the actual line
            drawn representing the Normal curve.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.NormalCurve.UseAntiAlias">
      <summary>
            Gets or sets whether the Normal curve is drawn using anti-aliasing.
            </summary>
      <remarks>
            By default, the normal curve is drawn using anti-aliasing methods.  Setting
            the UseAntiAlias property to false overrides this behavior.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.NormalCurve.Visible">
      <summary>
            Gets or sets whether the Normal curve is drawn.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.FillStyle">
      <summary>
            Represents the fill style for chart elements.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.Color1">
      <summary>
            Gets or sets the fill color.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.Color2">
      <summary>
            Gets or sets the second fill color.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.OutlineColor">
      <summary>
            Gets or sets the color filled region outlines.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.OutlineThickness">
      <summary>
            Gets or sets the thickness of filled region outlines.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.FillType">
      <summary>
            Gets or sets the fill type.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.GradientStyle">
      <summary>
            Gets or sets the fill gradient style.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.HatchStyle">
      <summary>
            Gets or sets the fill hatch style.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.Image">
      <summary>
            Gets or sets the fill image.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.FillStyle.Alpha">
      <summary>
            Gets or sets the fill alpha value (transparency).
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.LineStyle">
      <summary>
            Represents the style of chart lines.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LineStyle.Thickness">
      <summary>
            Gets or sets the thickness of the line in pixels. The valid range is from 0 to 1000.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LineStyle.Color">
      <summary>
            Gets or sets the color of the line.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LineStyle.Pattern">
      <summary>
            Gets or sets the pattern of the line.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LineStyle.LineJoin">
      <summary>
            Gets or sets the joining style of the drawn line segments.
            </summary>
      <remarks>
            For further details, see the discussion of the LineJoin property and LineJoin
            enumeration for the System.Drawing.Pen instance.  The default value is appropriate
            for most situations.  Lower MiterLimit values or LineJoin.Round might be appropriate
            for thick lines.
            </remarks>
    </member>
    <member name="P:C1.C1Report.CustomFields.Chart.LineStyle.MiterLimit">
      <summary>
            Gets or sets the miter limit of the joints of the drawn line.
            </summary>
      <remarks>
            For further details, see the discussion of the MiterLimit property for
            the System.Drawing.Pen instance.  The default value is appropriate for most
            situations.  Lower values might be appropriate for thick lines.
            </remarks>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.IntervalCreationMethodEnum">
      <summary>
            Defines the method of interval creation.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.IntervalCreationMethodEnum.Automatic">
      <summary>
            Interval boundaries and width are calculated based on the data statistics.
            The number of intervals is an optional input.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.IntervalCreationMethodEnum.SemiAutomatic">
      <summary>
            Starting interval, interval width, and the number of intervals specify interval boundaries. 
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.IntervalCreationMethodEnum.XDataBoundaries">
      <summary>
            The X data inputs will be used for interval boundaries.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.DisplayTypeEnum">
      <summary>
            Defines the type of how to display the intervals.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.DisplayTypeEnum.Histogram">
      <summary>
            Displays the intervals and counts as a histogram.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.DisplayTypeEnum.FrequencyGraph">
      <summary>
            Displays the intervals and counts as a frequency graph.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.DisplayTypeEnum.SteppedFrequencyGraph">
      <summary>
            Displays the intervals and counts as a stepped frequency graph.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.FillTypeEnum">
      <summary>
            Specifies how data shapes are filled.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.FillTypeEnum.SolidColor">
      <summary>
            Solid color is used for filling using Color1.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.FillTypeEnum.Gradient">
      <summary>
            A two color gradient is used to fill using Color1 and Color2 with a pattern enumerated by the <see cref="T:C1.C1Report.CustomFields.Chart.GradientStyleEnum" />./&gt;.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.FillTypeEnum.Hatch">
      <summary>
            A two color hatch pattern is used to fill using Color1 and Color2 with a pattern enumerated by the <see cref="T:C1.C1Report.CustomFields.Chart.HatchStyleEnum" />./&gt;.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.FillTypeEnum.Texture">
      <summary>
            A texture is created by tiling the specified Image of the FillStyle.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.GradientStyleEnum">
      <summary>
            Defines the style of the gradient.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.None">
      <summary>
            No gradient filling.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.Horizontal">
      <summary>
            From left (Color1) to right (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.HorizontalCenter">
      <summary>
            From center (Color1) to left and right (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.Vertical">
      <summary>
            From top (Color1) to bottom (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.VerticalCenter">
      <summary>
            From center (Color1) to top and bottom (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.Diagonal">
      <summary>
            From left-bottom (Color1) to right-top (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.DiagonalCenter">
      <summary>
            From center (Color1) to  left-bottom and right-top (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.DiagonalBack">
      <summary>
            From left-top (Color1) to right-bottom (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.DiagonalBackCenter">
      <summary>
            From center (Color1) to left-top and right-bottom (Color2).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.Radial">
      <summary>
            From center (Color1) to corners (Color2) in radial direction.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.GradientStyleEnum.FromCenter">
      <summary>
            From center (Color1) to corners (Color2).
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.HatchStyleEnum">
      <summary>
            Defines the style of Hatch.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.None">
      <summary>
            No pattern.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Horizontal">
      <summary>
            A pattern of horizontal lines.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Vertical">
      <summary>
            A pattern of vertical lines.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.ForwardDiagonal">
      <summary>
            A pattern of lines on a diagonal from upper left to lower right.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.BackwardDiagonal">
      <summary>
            A pattern of lines on a diagonal from upper right to lower left.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Cross">
      <summary>
            Specifies horizontal and vertical lines that cross.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DiagonalCross">
      <summary>
            Specifies forward diagonal and backward diagonal lines that cross. The lines are antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent05">
      <summary>
            Specifies a 5-percent hatch. The ratio of foreground color to background color is 5:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent10">
      <summary>
            Specifies a 10-percent hatch. The ratio of foreground color to background color is 10:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent20">
      <summary>
            Specifies a 20-percent hatch. The ratio of foreground color to background color is 20:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent25">
      <summary>
            Specifies a 25-percent hatch. The ratio of foreground color to background color is 25:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent30">
      <summary>
            Specifies a 30-percent hatch. The ratio of foreground color to background color is 30:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent40">
      <summary>
            Specifies a 40-percent hatch. The ratio of foreground color to background color is 40:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent50">
      <summary>
            Specifies a 50-percent hatch. The ratio of foreground color to background color is 50:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent60">
      <summary>
            Specifies a 60-percent hatch. The ratio of foreground color to background color is 60:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent70">
      <summary>
            Specifies a 70-percent hatch. The ratio of foreground color to background color is 70:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent75">
      <summary>
            Specifies a 75-percent hatch. The ratio of foreground color to background color is 75:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent80">
      <summary>
            Specifies a 80-percent hatch. The ratio of foreground color to background color is 80:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Percent90">
      <summary>
            Specifies a 90-percent hatch. The ratio of foreground color to background color is 90:100.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.LightDownwardDiagonal">
      <summary>
            Specifies diagonal lines that slant to the left from top points to bottom points and
            are spaced 50 percent closer together than ForwardDiagonal, but they are not antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.LightUpwardDiagonal">
      <summary>
            Specifies diagonal lines that slant to the left from top points to bottom points and
            are spaced 50 percent closer together than BackwardDiagonal, but they are not antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DarkDownwardDiagonal">
      <summary>
            Specifies diagonal lines that slant to the right from top points to bottom points,
            are spaced 50 percent closer together than, and are twice the width of ForwardDiagonal.
            This hatch pattern is not antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DarkUpwardDiagonal">
      <summary>
            Specifies diagonal lines that slant to the left from top points to bottom points,
            are spaced 50 percent closer together than BackwardDiagonal, and are twice its width,
            but the lines are not antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.WideDownwardDiagonal">
      <summary>
            Specifies diagonal lines that slant to the right from top points to bottom points,
            have the same spacing as hatch style ForwardDiagonal, and are triple its width, but are not antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.WideUpwardDiagonal">
      <summary>
            Specifies diagonal lines that slant to the left from top points to bottom points,
            have the same spacing as hatch style BackwardDiagonal, and are triple its width, but are not antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.LightVertical">
      <summary>
            Specifies vertical lines that are spaced 50 percent closer together than Vertical.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.LightHorizontal">
      <summary>
            Specifies horizontal lines that are spaced 50 percent closer together than Horizontal.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.NarrowVertical">
      <summary>
            Specifies vertical lines that are spaced 75 percent closer together
            than hatch style Vertical (or 25 percent closer together than LightVertical).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.NarrowHorizontal">
      <summary>
            Specifies horizontal lines that are spaced 75 percent closer together
            than hatch style Horizontal (or 25 percent closer together than LightHorizontal).
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DarkVertical">
      <summary>
            Specifies vertical lines that are spaced 50 percent closer together than Vertical and are twice its width.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DarkHorizontal">
      <summary>
            Specifies horizontal lines that are spaced 50 percent closer together than Horizontal and are twice its width.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DashedDownwardDiagonal">
      <summary>
            Specifies dashed diagonal lines that slant to the right from top points to bottom points.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DashedUpwardDiagonal">
      <summary>
            Specifies dashed diagonal lines that slant to the left from top points to bottom points.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DashedHorizontal">
      <summary>
            Specifies dashed horizontal lines.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DashedVertical">
      <summary>
            Specifies dashed vertical lines.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.SmallConfetti">
      <summary>
            Specifies a hatch that has the appearance of confetti.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.LargeConfetti">
      <summary>
            Specifies a hatch that has the appearance of confetti,
            and is composed of larger pieces than SmallConfetti.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.ZigZag">
      <summary>
            Specifies horizontal lines that are composed of zigzags.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Wave">
      <summary>
            Specifies horizontal lines that are composed of tildes.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DiagonalBrick">
      <summary>
            Specifies a hatch that has the appearance of layered bricks that
            slant to the left from top points to bottom points.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.HorizontalBrick">
      <summary>
            Specifies a hatch that has the appearance of horizontally layered bricks.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Weave">
      <summary>
            Specifies a hatch that has the appearance of a woven material.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Plaid">
      <summary>
            Specifies a hatch that has the appearance of a plaid material.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Divot">
      <summary>
            Specifies a hatch that has the appearance of divots.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DottedGrid">
      <summary>
            Specifies horizontal and vertical lines, each of which is composed of dots that cross.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.DottedDiamond">
      <summary>
            Specifies forward diagonal and backward diagonal lines, each of which is composed of dots, that cross.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Shingle">
      <summary>
            Specifies a hatch that has the appearance of diagonally-layered shingles that slant
            to the right from top points to bottom points.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Trellis">
      <summary>
            Specifies a hatch that has the appearance of a trellis.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.Sphere">
      <summary>
            Specifies a hatch that has the appearance of spheres laid adjacent to one another.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.SmallGrid">
      <summary>
            Specifies horizontal and vertical lines that cross and are spaced 50 percent
            closer together than hatch style Cross.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.SmallCheckerBoard">
      <summary>
            Specifies a hatch that has the appearance of a checkerboard.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.LargeCheckerBoard">
      <summary>
            Specifies a hatch that has the appearance of a checkerboard with
            squares that are twice the size of SmallCheckerBoard.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.OutlinedDiamond">
      <summary>
            Specifies forward diagonal and backward diagonal lines that cross but are not antialiased.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.HatchStyleEnum.SolidDiamond">
      <summary>
            Specifies a hatch that has the appearance of a checkerboard placed diagonally.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Chart.LinePatternEnum">
      <summary>
            Represents the patterns of the line.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LinePatternEnum.Solid">
      <summary>
            A solid line.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LinePatternEnum.Dash">
      <summary>
            A dashed line.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LinePatternEnum.Dot">
      <summary>
            A dotted line.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LinePatternEnum.DashDot">
      <summary>
            A line with alternating dashes and dots.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LinePatternEnum.DashDotDot">
      <summary>
            A line with series consisting of a dash followed by two dots.
            </summary>
    </member>
    <member name="F:C1.C1Report.CustomFields.Chart.LinePatternEnum.None">
      <summary>
            No line is drawn.
            </summary>
    </member>
    <member name="T:C1.C1Report.CustomFields.Gradient">
      <summary>
            This class inherits from <see cref="T:C1.C1Report.Field" /> and uses a LinearGradient brush
            to draw a gradient background. If the field contains text, that is also displayed.
            </summary>
    </member>
    <member name="M:C1.C1Report.CustomFields.Gradient.#ctor">
      <summary>
            Initializes a new instance of the <see cref="T:C1.C1Report.CustomFields.Gradient" /> class.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Gradient.ColorFrom">
      <summary>
            Initial color for the gradient background.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Gradient.ColorTo">
      <summary>
            Final color for the gradient background.
            </summary>
    </member>
    <member name="P:C1.C1Report.CustomFields.Gradient.Angle">
      <summary>
            Angle for the gradient pattern, in degrees.
            </summary>
    </member>
    <member name="M:C1.C1Report.CustomFields.Gradient.GetRenderContent(System.String@,System.Drawing.Image@,System.Boolean)">
      <summary>
            Selects the text or image that will be rendered by the field.
            </summary>
      <param name="value">Field text.</param>
      <param name="img">Field image.</param>
      <param name="designTime">Whether we in design time or runtime.</param>
    </member>
    <member name="M:C1.C1Report.CustomFields.Gradient.DrawRoundRect(System.Drawing.Graphics,System.Drawing.Pen,System.Drawing.Rectangle,System.Int32,System.Int32)">
      <summary>
            Draw rounded rectangle.
            </summary>
    </member>
    <member name="M:C1.C1Report.CustomFields.Gradient.FillRoundRect(System.Drawing.Graphics,System.Drawing.Brush,System.Drawing.Rectangle,System.Int32,System.Int32)">
      <summary>
            Fill rounded rectangle.
            </summary>
      <param name="g">
      </param>
      <param name="brush">
      </param>
      <param name="rc">
      </param>
      <param name="radiusX">
      </param>
      <param name="radiusY">
      </param>
    </member>
    <member name="M:C1.C1Report.CustomFields.Gradient.RoundRect(System.Drawing.Graphics,System.Drawing.Brush,System.Drawing.Pen,System.Drawing.Rectangle,System.Int32,System.Int32)">
      <summary>
            Draw and fill rounded rectangle.
            </summary>
      <param name="g">
      </param>
      <param name="brush">
      </param>
      <param name="pen">
      </param>
      <param name="rc">
      </param>
      <param name="radiusX">
      </param>
      <param name="radiusY">
      </param>
    </member>
  </members>
</doc>